Anchor System
$45.00 | 300 piece(Min.Order)
Attention: Please confirm the price when you place order
Ground earth anchor system
Rapid installation times
Largest range of anchors in China ranging from 1-450kN
Durability and quality (up to 120+ years)
Our Ground earth anchor system for tying down tower guylines and securing a skyline at the tailhold. Stumps have been the most convenient, cheapest, and therefore the most widely used anchor. In many areas, sound stumps of adequate size and proper location relative to the landing are becoming scarce. Older, large stumps and their root systems become rotten and their holding capacity is difficult to predict. Quite often, new stumps are smaller than needed for anchoring skyline machinery.
- Send Inquiry
- Add To Cart
- Product Introduction
Earth anchor Video:
https://www.youtube.com/watch?v=hhKzMw4FhFo
Ground earth anchor system:
Ground earth anchors are a crucial part of any tower guylines or skyline systems. However, traditional anchor options such as stumps are becoming less reliable due to their scarcity and unpredictable holding capacity. That's why Anchor Systems offers a reliable and affordable alternative for securing your equipment and ensuring the safety of your workers.
Our anchor system is made of high-quality materials and is designed to withstand the toughest of conditions. It can be easily installed and adjusted to securely anchor guylines and skylines, making it the ideal solution for logging, construction, and utility industries.
Using our anchor system not only improves the safety of your job, but it also increases the efficiency of your work. As traditional anchor options become less practical, our system provides a reliable and long-term solution that requires minimal maintenance and is always ready when you need it.
The Anchor System is versatile, allowing it to be used for a variety of applications. It is suitable for use in different soil types and can be installed at various depths depending on the requirements of the job. Our system is perfect for small to large-scale projects, making it a reliable and affordable alternative to traditional anchor options.
At Anchor Systems, we understand the importance of safety and reliability in any job. That's why we put our customers first and ensure that all our products are of the highest quality. Whether you are in the logging, construction, or utility industry, our Ground earth anchor system is the perfect solution for your anchoring needs. Contact us today to learn more about our products and how they can benefit your business.
We have completed research and development of anchor systems that could be used as substitutes for stumps. The objective of this research was to develop an inexpensive and portable anchoring system that could be used in rough terrain. One anchoring system meeting these criteria is the tipping-plate anchor. This document describes the tipping-plate anchors, the installation equipment and the procedures for designing and installing anchorages made from bridled tipping- plate anchors. Results of pull-to-failure tests for a few specific conditions.
Earth anchor system:
The percussion type anchors are made of mild steel. A wire rope 3/4 or 5/8 inch in diameter is per-manently attached to the anchor with a pressed eye; the free end of the wire rope has a pressed eye with thimble.
Three types of impact hammers can be used for driving the earth anchors: hydraulic, pneumatic, and gasoline. Hydraulic hammers require a power unit that can deliver a flow of 8 gallons per minute at a pressure of 2000 pounds per square inch. Construction equipment such as hydraulic backhoes, excavators, and yarders used for logging have hydraulic systems meeting these requirements. Unless
the equipment can travel over steep and uneven terrain, however, anchor installations will be confined to a 200-foot radius from where the power unit is parked. A portable hydraulic power unit that can be carried into remote areas has been developed that meets the requirements for providing power to impact hammers. Pneumatic hammers require an air supply of at least 100 cubic feet per minute.
Earth anchor system drive rod:
Drive rods (sometimes called drive gads) transmit the reciprocating force from the impact hammer to the anchor and must be customized to fit the anchor. Most hydrau-lic and pneumatic hammers require a rod 1.125 or 1.25 inches in diameter. Some smaller hammers and the gasoline hammers use a rod 0.875 inch in diameter. The end of the rod that is inserted into the anchor needs to be machined for a tight clear-ance. If the clearance is too small, however, the anchor may become seized on the
rod during installation. The rod should also be machined so that the end of the rod does not touch the bottom of the socket in the anchor.Drive rods can be obtained in 2.5-, 4.0-, and 5. 5-foot lengths. The rods used for driving Manta Ray anchors are designed so that sections may be coupled together;
rods for other anchors are a fixed length. A disadvantage of using fixed-length rods is that the depth an anchor is driven to is limited by the length of the rods. Also, if a 5.5-foot rod is used to start the driving operation, the operator will be required to hold the hammer about 6 feet above the ground. This may require standing on something to gain the proper working elevation. If the rods are shorter and additional sections can be added as the anchor is driven, the operator is usually working with the
hammer below shoulder height, which is easier and safer.
| Email: | lindaguo@earth-anchoring.com |
| Mobile: | 0086-13935114760 |
 |
Hot Tags: anchor system, China, suppliers, manufacturers, factory, customized, quotation, low price, in stock, free sample, made in China, Chisel Style Medium heavy Capacity Percussion Antaeus Earth Anchor, Heavy Capacity Percussion Earth Anchor, Cm Style Medium heavy Capacity Percussion Earth Anchor, Manta Ray Style Medium heavy Capacity Percussion Antaeus Earth Anchor, Sting Ray Style Heavy Capacity Percussion Earth Anchor
