Welded Ground Anchor

The anchor’s sloped lead point improves penetration and helps soil flow from below the hub to above the anchor. The system consists of a screw anchor, anchor rod and installation tooling.

Send Inquiry
Add To Inquiry

Product Introduction

Welded Ground Anchor are primarily designed and constructed to resist outwardly- directed loads imposed on the foundation of a structure. These outwardly-directed loads are transmitted to the soil at a greater depth by the anchors. Burled anchors have been used for thousands of years to stabilize structures. Tents are the oldest structures which were stabilized by using welded ground anchor or stakes. Unt1l the middle of the nineteenth century, anchors were primarily used for stabilizing fairly 1ightweight structures. With the design and construction of large suspension bridges, very large loads were transmitted to the bridge foundation. In order to support these loads. Pernanent anehoring systems in rock medium were gradually developed and constructed. With the development and constructlon of special lightweight structures such as lattice transmission towers and radar towers, design of special tension anchoring systems for foundations became necessary, primarily because the wind load created reactions which were greater than the self-weight of the structures.

1. extremely environmentally friendly and economical, can be recycled.

2. installed in a matter of minutes without digging and concrete.

3. more efficiency, lower cost, low labor strength.

4. operated precisely, flexible during drilling process.

5. no negative effects on landscape, no damaging on surrounding area.

6. Welded Ground Anchor has long lifetime.