Ground Anchor
This Ground Anchor, also known as Earth Anchor,these anchors can also be used in any area founded by soil that achieves its capacity through the soil. These anchors can either be run in spirally or impact-driven into the ground. The choice will depend upon the project design and the force-resistance characteristics that are needed.
- Send Inquiry
- Add To Inquiry
- Product Introduction
Ground anchor:
The ground anchor is tendon bond length bonded to the grout and capable of transmitting the applied tensile load into the ground. The anchor bond length should be located behind the critical failure surface ground. Tendon is the main portion on the assembling of the ground anchor. An ground anchor may is a high strength steel tendons are installed at an inclination to resist the applied tensile load efficiently.
Ground anchors can be divided into anchor piles, anchor points, anchor ingot and dragging pits. In lifting operations, ground anchors are commonly used to fix dragging rope, cable wind rope, hoist, guide pulley, etc. Ground anchors are generally made of steel wire ropes, steel tubes, reinforced concrete prefabricated parts, logs and other embedded parts buried in the ground. In installation of power facilities, and other engineering construction process, we often need to be in a position setting fixed point on the ground, and the fixed point often should assume certain mechanical function, such as power transmission and transformation line installation work area, in the process of installation of wires, we often need to tight line work after finish pull line, tight line cable tension is very large, It's easy to pull the car or cause the line to not arc enough, so we have to find a way to hold the car in place, and that's when we use anchors.
Common ground anchor is the anchor point with a conical point and set in the spiral on the anchor rod anchor, usage is in anchor rod inserted into the soil, then rotate, through the role of anchor pieces make anchor rod inserted into the land, through need using the control rod to rotate the bolt, install and remove the need to install the control rod on the anchor rod, disassembly and installation process is more trouble. Ground anchor is a necessary device for fixing the hoist. There are three commonly used forms: 1. Pile type ground anchor; 2. Balance weight method; 3. Pit type ground anchor.
Material | Steel |
Surface treatment | Paint |
Size | 250mm |
Process | Laser cutting and Welded |
Type | Socket internal drive, power installed anchor |
Supply with | Single or Double thimble eye nut and anchor rod |
Application
The socket type screw anchor can be used for the structures, constructions, and significant public works projects that make current life conceivable.
The main application on existing structures is to prevent horizontal movement of retaining walls, bridge abutments, etc. In new construction, anchors are used to retain sheet piles, bored pile walls and steel tubes.
Hot Tags: ground anchor, China, suppliers, manufacturers, factory, customized, quotation, low price, in stock, free sample, made in China, Power Driver Socket M24 350mm 14 Screw Anchor, Power Driver Screw Anchor Shaft Type, Power Driver Screw Anchor Socket Type, Power Driver Socket M24 175mm Screw Anchor, Power Driver Socket M24 450mm 18 Screw Anchor, 2 1 2 Socket Screw Anchor with Helix 1 2 Thickness 10000 Ft lb Torque
