Utility Earth Anchor

Utility earth anchor:

The utility model relates to the technical field of electric power operation, in particular to a ground earth anchor for electric outdoor operation. 2. In the construction process of transmission lines, it is often necessary to anchor tensioner, tractor and other equipment as well as other stress ropes. Conventional anchoring methods are as follows: Excavate the ground earth anchor pit, set the bridle way, place steel plate ground earth anchor at the bottom of the anchor pit, align the steel plate ground anchor ring with the bridle way direction, connect the steel plate ground anchor ring through the U-shaped ring wire sleeve or rod, wire sleeve or rod placed in the bridle way oblique upward, and then backfill and tamp the ground anchor pit rope head or rod rod rod is used as the anchorage connection point. After the anchorage is finished, pull out the backfill soil, take out the steel plate ground anchor, steel wire sleeve or wire rod, U-shaped ring to clean up for the next use. 3.A kind of power construction with spiral anchor", including the ground anchor, the bottom end of the ground anchor is provided with anchor tip, the lower end of the ground anchor and located in the upper end of the anchor tip is provided with spiral blades, the upper end of the ground anchor is provided with a fixed frame, the middle of the upper end of the fixed frame is provided with a fixed transverse plate, The middle thread of the fixed transverse plate is connected with a threaded rod, the upper end of the threaded rod is provided with a ring handle, both sides of the fixed frame are provided with a fixed block, the fixed block is far away from the fixed frame is provided with a fixed rod, one end of the fixed rod is provided with a rotating frame, the central two ends of the rotating frame are provided with a threaded pipe and threaded pipe two, The threaded pipe one is connected with the threaded end of the fixing rod, and the threaded pipe two is provided with a movable rod with a threaded connection. 4. However, the existing ground anchors usually adopt the structure of single anchor rod and single anchor hook, so that one ground anchor can only meet the connection operation of wire rope in a specific direction, resulting in a narrow range of use of ground earth anchors, unable to meet the wider range of use.