Special Designed Gound Anchors
Dec 13, 2021| The Ground Anchors are special designed anchors, 50mm diameter and available in three lengths, 840mm, 1050mm and 1260mm. Where normal anchors (round pegs) have an allowable maximum vertical load of 300kg, Ground Anchors can be loaded from 550kg till 2200kg per anchor, depending on the length of anchor and the subsoil. Loading figures are available for the available anchor lengths in combination with several types of subsoil. Furthermore, a test rig is available which can perform tensile tests on anchors to check the actual tensile load on the anchors at the specific location. The test rig can be used without the use of external power supplies.
Accessories
A wide range of accessories is available for the Ground Anchor, which creates a wide range of application of the anchors. Special brackets for Truss tower bases (MPT-004) are available, in which the Ground Anchor can be installed, creating a dedicated position of the ballast with a pure activation of the ballast at the position were the temporary demountable structure needs it.
Installation
The Ground Anchors can be installed either manually or with power tools. Due to its special design, the anchor can be installed within 30sec. Dismantling and removing the anchors is even quicker. By just rotating the anchor once 360º with a wrench, a 1000kg anchor can be removed by hand. Using the Ground Anchor results in a quick, easy, low transport volume, dedicated and proper ballast solution for temporary demountable structures.

