Dead-end Tower Ground Screw Anchor

Dead-end tower ground screw anchor:

A dead-end anchor tower is a fully self-supporting structure used in construction of overhead power lines. A dead-end transmission tower uses horizontal strain insulators at the end of conductors. Dead-end towers may be used at a substation as a transition to a "slack span" entering the equipment, when the circuit changes to a buried cable, when a transmission line changes direction by more than a few degrees, or at intervals along a straight run to limit the extent of a catastrophic collapse.

Since dead-end towers require more material and are heavier and costlier than suspension towers, it is uneconomic to build a line with only self-supporting structures. Install the dead end tower, you can choose the ground screw anchors. Usually the 10inch socket type ground screw anchor are popular used in this field. While, the big type ground screw anchor of 450mm also choosed.