What are the precautions when the construction of vegetable sheds is buried in the anchorage

First, the selection of high-quality anchor rebar.

In greenhouse construction, the anchor should be buried once, used for many years. Ground anchor steel bar buried in a section of soil, exposed outside a section, easy to rust, so used to make anchor steel must be of good quality, durable, not rusty. In the survey found that there are farmers' anchors have not been buried in the soil, has been rusty, obviously will reduce its service life. Therefore, it is important to choose the high quality of the ground anchor rebar.

Second, the depth of the anchor pit should be appropriate. The anchor is not firmly buried, the key is how deep the anchor is buried. Obviously the shallower the anchoring, the less secure it is, and the easier it is to be pulled out. After the construction of the new shed wall, the soil layer at the anchorage of the east and west walls is mostly loose soil that rolls down from the wall. Many farmers in situ buried anchorage, although the depth is enough, but because of the loose soil layer, not easy to compact, resulting in the anchor is not solid. It is suggested that the depth of the buried anchor should reach at least 0.5m, and must be a hard soil layer, if the soil layer is loose, can take the first buried into a part of the anchor, and then watering solid, and then fill the solid.

Third, add columns.

There are more steel wire in the shed, the number of anchors required is also more, in order to further improve the firmness of the anchor, Hualiang suggested that before it is buried, in the inside of the anchor, a scrap column, so that the anchor wire is attached to the pillar, separated from the shed wall. This approach also facilitates the use of wire tighteners to connect wires to ground anchor lines.