Transmission tower earth anchor
Feb 20, 2023| Transmission tower earth anchor:
The existing transmission tower main material replacement device is generally used next to the tower set up a higher than the tower pole as a fulcrum method, the use of tools and equipment and complex structure, single weight, not convenient transportation and use, and set up pole, do earth anchor is not only time-consuming and laborious, sometimes because there are towers, wires, site restrictions, avoid very troublesome, This delayed the restoration of the tower. Therefore, it is necessary to provide a device for replacing the main material of the transmission tower, which can not only complete the work of replacing the damaged main material of the tower, but also has the advantages of simple construction, convenient transportation and not restricted by the site. Technical realization elements: the invention provides a device for replacing the main material of a transmission tower, the transmission tower comprises a longitudinal arranged tower body, the tower body is provided with a fixed transmission tower main limb, the main limb of the tower is composed of two main limb Angle steel set relative cross section of steel; The replacement device comprises a middle structure section; An Angle clamp installed on the lower connecting section of the main material of the tower to be replaced. A hydraulic cylinder driven by a motor, an Angle regulator, a length regulator and the middle structure section are successively connected; The middle structural segment is the same structure as the Angle steel clamp one and is connected with the Angle steel clamp two installed on the upper connecting segment of the main material of the tower to be replaced. The Angle clamp is composed of four Angle clamp fixed by a bolt vertically arranged with its surface of the section of the meter type clamp; Each Angle clip consists of two side plates perpendicular to each other and an extended limb located on an Angle bisector of the Angle between the two side plates; Each Angle clip is arranged between the main limb Angle steel and a sticker plate fixed by the bolt; One side of the sticker plate is connected with the outer side of the main limb Angle steel, and the other side is connected with the Angle steel clip. The extended limb is in Y shape, one end of which is connected with the Angle of the Angle clip, and the other end is provided with two perpendicular to the more.