Safety technical measures for ground anchoring

Jun 02, 2021|

Safety technical measures for ground anchoring

1. Ground anchor function and scope of application: small winch fixing, gas pump fixing, belt conveyor head and tail fixing, filling pipe, etc.

2. After receiving the notice from the mine leader or the dispatching station for anchoring the ground, the production team must first check the roof condition of the construction site, the condition of the support, etc., and prepare the required materials.

3. Before construction, you must carefully check the condition of the roof near the construction. An experienced worker must use a long-handled tool with a length of not less than 2.0m (3m) to stand in a safe place and find all the floating gangue and live rock on the roof. . One person is looking for the top, and the other is under the guardianship. When looking for the top, no one is allowed under the location being looked for, and empty top work is strictly prohibited.

4. The ground anchor is driven by a large wind hammer (generally a dry eye), and the gas in the return air duct must be checked for abnormalities before construction.

5. The ground anchor should be repaired and used normally with anchor rod fixing equipment, and the big eye must be blown dry when there is water, and the anchoring agent must be placed in more than 2 rolls. If the anchoring force fails to meet the requirements, it must be re-strike nearby.

6. If ground anchors cannot be laid at the construction site, report to the leader in time and adopt other methods to fix it.


Send Inquiry