Material for different type earth anchor

Jun 21, 2022|

Material for different type earth anchor:


1, Metal pile earth anchor material: metal pile generally using ordinary steel welded generally using 2-5 mm iron metal sheet 10 mm metal rod processing.


2, Metal pile anchor processing technology metal pile generally through cutting, bending welding pickling electroplating and other processes can produce qualified metal piles and their pickling electroplating important anti-corrosion treatment process directly affect the service life of metal piles.


3, The metal pile ground anchor service life impact element Metal processing level directly determines the service life of the metal pile selection of iron metal quality welding point quality water quasi-no sand eye virtual welding skin solder joint thickness some affect the service life of the metal pile continuous processing work quality pickling important anti-corrosion basic process electroplating quality between the surface treatment Bad affect the metal pile anti-corrosion treatment quality The whole number of processes Improve the appearance of the pile The use of the use of the environmental use affects the service life of the metal pile Soil acid and alkali degree The operation of the process is not appropriate to cause the destruction of the metal pile surface Cause the destruction of the metal protective layer Leads to gold Accelerated corrosion of the genus pile reduces service life In general, metal piles are used between 8-10.


4. Spiral piles are generally used to strengthen tents in the sand to prevent tents from being blown away by the wind. At the same time, the spiral pile has better gripping capacity than the general inclined pile in the case of soft soil in the sand. Usually, an iron rod about 1 cm in diameter is required, inserted in opposite directions into the small hole in the top of the pile, and then rotate the pile clockwise until the spiral part enters the sandy soil. Note that spiral piles should not be used in harder soil conditions to avoid reduced work efficiency.

Send Inquiry