Helical ground screw anchor

Helical ground screw anchor:

In the installation of electric power facilities and other engineering construction process, we often need to set a fixed point at a ground position, and the fixed point is often to bear a certain force, such as in the transmission and transformation area for line installation, in the process of installing the wire, we often need to tighten the line after pulling the line, the cable tension is very large, It is easy to pull the car or cause the arc of the line to be insufficient, so we must find a way to fix the car. At this time, we will use ground anchors. The traditional ground anchors are ground anchors with conical pointed points and spiral anchor pieces set on the ground anchors. When we rotate, we need to use the operating rod, namely the extension rod, to easily turn the earth anchor into the earth. But every time we fix the earth anchor, we have to rotate the rod, but the length of many rotating rods are fixed, and the length cannot be effectively adjusted. At present, no effective solution has been proposed to solve the problems in related technologies. Technical realization elements: In view of the problems in related technologies, the utility model proposes a spiral ground anchor for power construction, in order to overcome the above technical problems existing in the existing related technologies. Therefore, the specific technical scheme adopted by the utility model is as follows: A screw anchor for electric power construction, including the ground bolt, the bottom end of the ground bolt is provided with an anchor tip, the lower end of the ground bolt and located at the upper end of the anchor tip is provided with a spiral blade, the upper end of the ground bolt is provided with a fixed frame, the middle end of the fixed frame is provided with a fixed transverse plate, the middle thread of the fixed transverse plate is connected with a threaded rod, The upper end of the threaded rod is provided with a ring handle, the middle of both sides of the fixing frame are provided with a fixed block, the fixing block are far from one end of the fixing frame is provided with a fixed rod, one end of the fixing rod is provided with a rotating frame.